News

The filtration accuracy is usually in the range of 25μm to 100μm, mainly used to remove larger particles such as dust and particulate matter. This ...

The main function of compressed air filters is to filter harmful substances such as dust, oil, rust and moisture in the compressed air.

Cleaning pipes and valves: Before installation, make sure that the compressed air pipes and valves connected to the filter inlet and outlet are cle...

The removal process of a compressed air filter involves multiple steps to ensure that the filter can be effectively cleaned or replaced.

The replacement cycle of compressed air filter elements usually depends on the specific use environment and the type of filter element.

The large adsorbent bed with a contact time of 6.25 seconds ensures that the saturated air entering the dryer is dried to the required dew point an...

According to the adsorbent regeneration method, they can be mainly divided into two types: heatless regeneration micro-thermal regeneration adsorpt...

The oil content of the air entering the tower should be controlled below 0.01PPM; in view of the fact that oil-free air compressors cannot be truly...

The adsorption dryer achieves the drying effect through "pressure change" (pressure swing adsorption principle).

The adsorption dryer uses the adsorbent (activated alumina, silica gel, molecular sieve) to absorb moisture to reduce the moisture content in compr...

Compressed air stations of various types in various industries. Multiple small-capacity compressors can be used together with MFS, and one large-ca...

The compressed air filter consists of a filter cartridge, a clean air chamber, a pulse self-cleaning compressed air piping, an air intake protectio...