Air Compressor Desiccant Dryer

Air Compressor Desiccant Dryer Product Features:

Long-term stability: Relying on reasonable structure and high-quality adsorbent materials, the dryer can stably maintain the drying effect for a long time, continue to output dry compressed air, reduce production quality problems caused by drying effect fluctuations, and ensure reliable air supply.

Strong anti-interference: it can adapt to a variety of complex conditions such as high temperature, high humidity and different pressure requirements, and can also work normally in the compressed air system near the humid south factory or high temperature industrial furnace, and effectively deal with the interference of the environment on the drying process.

Advantages of double tower structure: The use of double tower structure, one tower adsorption drying, one tower regeneration, two towers alternating work to achieve continuous drying, similar to double insurance, improve work efficiency, to avoid a single tower adsorbent saturation caused by drying interruption.

Convenient maintenance of adsorbent: the adsorbent needs to be replaced or regenerated after a certain period of use. The equipment can determine the corresponding time according to the operating parameters and the actual situation, and the process is standardized. The operator can easily master the maintenance points through training to ensure the continuous optimization of equipment performance.

Rated Conditions	Working Range	Avaliable
Working pressure : 0.7MPag / 100psig	Max.working pressure : 1.0MPag / 145psig	Higher pressure above 1.0Mpag / 145psig
Inlet temp : 160 ℃ / 320 ℉	Max.inlet temp : 200℃ / 394 ℉	Booster heater
Cooling water temp : 32℃ / 90 ℉	Max.ambient temperature : 40℃ / 104 ℉	Higher capacity
		Stainless steel vessel or piping
		GB,ASME,PED,etc. vessels
		Zero loss drain

1. How does it dry compressed air?
It mainly relies on internal adsorbents (such as activated alumina, molecular sieve, etc.) to absorb water in the compressed air. When the humid compressed air enters the dryer, the water is adsorbed by the adsorbent, so that the compressed air is dried.

2. To what extent can this dryer dry compressed air?
It can reduce the dew point of compressed air to -40 °C or even lower, and can effectively remove most of the moisture in compressed air, meeting the requirements of high air drying industrial applications.

3. Which industries are suitable for this type of dryer?
In the manufacturing industry, electronics industry, pharmaceutical industry, food industry and other industries with high requirements for compressed air quality are widely used. For example, electronic chip manufacturing requires extremely low-humidity air, and pharmaceutical processes require dry, sterile air, which is indispensable to these industries.

4. Can it be used in compressed air systems with different pressure requirements?
Agreed. It can adapt to a variety of pressure requirements of the system, whether it is high pressure or low pressure compressed air, can effectively dry.

5. What are the main aspects of its operating costs?
Mainly includes energy costs, such as hot gas consumption for adsorbent regeneration; The cost of replacing or regenerating the adsorbent; And equipment daily maintenance and maintenance of labor, material costs, etc.

6. During operation, does this dryer have safety risks?
It is safe during normal operation. However, if the hot air supply system is faulty, the temperature may be abnormal, which has certain security risks. At the same time, improper operations during equipment maintenance, such as touching high-temperature components or inhaling adsorbent dust, may also cause injury to the operator. Therefore, you must strictly follow the operation manual for operation and maintenance.