The correct use of water separator depends on the specific type of equipment, such as oil-water separator and tea-water separator cup.
The use of oil-water separator includes:
Installation and water addition: The equipment does not need to be installed. After unpacking, add clean water until clean water overflows from the drain.
Heating: Turn on the built-in heating system switch, adjust the temperature to 50 degrees (the temperature can be appropriately lowered in summer), and heat for about 20 minutes.
Pour garbage: After heating, pour in kitchen waste, the equipment will automatically drain water and oil, and the garbage residue will be poured into the built-in trash can.
The use of tea-water separator cup includes:
Place tea leaves: Put an appropriate amount of tea leaves at the bottom of the tea-water separator cup, and adjust the amount according to personal taste and tea type.
Pour hot water: Pour hot water into the cup, be careful not to fill it up to avoid overflow, and adjust the temperature and amount of hot water according to personal taste.
Shake and separate: Tighten the cup lid, place it on a stable place and shake it gently several times to allow the tea leaves to fully soak, and then press or unscrew the bottom part as needed to pour the tea into another container.